What Causes A Sudden Coughing Fit

Sundrops In The Backyard / The pretty yellow flowers in my yard

Have a lot of follow-up to my last posting, here's a more studied watercolor painting of flowers from The Same a different angle. Watercolour, 10.5 x 15.5 inches (26.6 x 39 cm)

Voici une sorte de suivi de mon dernier croquis - une aquarelle plus étudiée des mêmes fleurs sous un angle différent. Aquarelle, 10,5 x 15,5 pouces (26,6 x 39 cm)

Making A Draught Excluder Patterns

Downloads:

• Drivers and firmware
• Manual

Consumables Origin:

• Brother LC-900BK - Ink Cartridge - Black
• Brother LC-900C - Ink Cartridge - Cyan
• Brother LC-900M - Print cartridge - Magenta
• Brother LC-900Y - Ink Cartridge - Yellow
• Brother - LC900RBWBP - 4 cartridges pack Black / yellow / cyan / magenta
  

consumables compatible :

• Compatible Black Ink Cartridge LC900BK Brother / LC41BK - 19ml
• Cartridge Cyan LC900C
• Cartridge Magenta LC900M
• Cartridge LC-900Y Yellow

• Economic Pack of 5 Compatible Ink Cartridges Brother - Cyan 2 Black + 1 + 1 + 1 Magenta Yellow: Brother 2 * LC900BK LC900C + + + LC900M LC900Y / Brother - 2 * 3 * 19 ml + 12.5 ml

Troubleshooting:

• Message " Chang. Imposs. ", " Cleaned. Imposs ", "Initial . Imposs. ", " Impress. Unable. ", " Seq. Imposs " :

- Check the presence of foreign objects such as staples or shredded paper inside the machine: Open the scanner cover by lifting the right corner of the cover. Look inside the machine and remove any foreign objects. Also check under the printhead.
- If the error persists: reset the machine to zero by disconnecting the unit for several minutes. Resetting the machine will erase all faxes in memory and the Fax Journal.

• "Low temp " The print head is too cold. Let the unit heat up.
• " Paper Jam": The paper is jammed in the machine.
• " Cover Open": The top cover is not completely closed. Open and close the top cover.
• " Offline": The call was interrupted by the corresponding or fax. Try again to send or receive.
• " Data mem. " Print data remains in the device memory. Print again from the computer. Or print data remains in memory from the device as the USB cable was unplugged while the computer sends data to the device. Press Stop / Exit. The device cancels the job and eject the page being printed.
• " Err. Connection" You tried to retrieve a document from a fax which was not programmed standby feeder. Check the configuration is waiting for the other machine.
• "Error com. ": A poor quality phone line caused a communication error. Retrying the call later. If the problem persists, check your line.
• " High temp. " The print head is too hot. Allow to cool.
• " of Memory": The device memory is full. (Sending faxes or copy operation in progress). Press Stop / Exit and wait for pending operations are completed, then try again. Or delete the data stored in memory. For more memory, turn off Fax Storage. Or print out the faxes that are in memory. Reduce print resolution.

Holly Willoughby Birthday Cake

Fax Magic 5 Philips Fax

Downloads:

• User Guide (PDF)

Consumables

• PFA351: Ribbon Philips Magic 5 - 140 pages
• CO-PFA351: Compatible Ribbon Magic 5 - 140 pages

Troubleshooting:

• Use service codes: they can cancel your customized settings and restore default settings from the factory. This may be necessary when the parameters change leads to unexpected reactions to the camera:
  

1) Press "OK " 4, 5 and " OK" to enter in service mode.
2) Enter a service code:
7, 1, 1, 7: Removes any custom settings and erases all stored data. The unit is reset according to defaults from the factory, and the initial installation process restarts.
7, 1, 4, 0: Cancels any custom settings. Messages and directory entries are maintained.
7, 2, 2, 7: Deletes faxes stored in memory in case of printing problems.
3) Confirm with "OK".
4) Select the arrows, "CONFIRM: YES."
5) Confirm with "OK".

• If a problem is not resolved using the descriptions in the guide use, follow these steps:
  

1. Unplug the unit.
2. Wait at least ten seconds, and reinsert the plug into the socket.
3. If the problem persists, contact Technical Support or your dealer.