Japanese Sharking Mobile

Phonefax 43S heat transfer



Download:

• User Guide (PDF)

Consumables :

• TTR400: ribbon Heat 140 pages
  

Troubleshooting:

• The documents sent are defective : Change resolution " RESOL.: STANDARD " to " RESOL.: FINE " or " RESOL. PHOTO . Change the contrast. Clean the scanner and document feeder. Control the unit by making a copy of the document. If the device works properly, it may be that the recipient's fax machine is faulty.
• The camera produces black lines when sending or printing : clean the scanner and charger documents.
• The copy is blank : The document must be filed in the ADF with the printed side facing up.
• printing is interrupted : Paper jam or paper jam, missing paper or ink film used. Follow the instructions on the display and the error report. After printing multiple pages, there may be a short pause occurs. The device will automatically continue printing.
• No printing : Check if the paper is well positioned and locked in place. The lever on the right side of the loading platform must be tipped back.
• documents are not loaded correctly : Clean the scanner and document feeder.
• The machine rings once, then a brief silence follows the device resonates : It is quite normal. After the first ring, the call management verifies the nature of the call. If it is uneconversation phone, the device continues to ring.
• No tone : Check the installation of the device (telephone cable connected to the telephone "line").
• shipments faxes are constantly interrupted : Try to send the fax manually: Press the "speaker" (above the 2 key) and dial the number. If the recipient has an answering machine, wait for the beep. Press the diamond (right of OK). It may be that the receiving device is not in receive mode.
• Squeals or silence in the handset : The call is a fax sending: Press the diamond (right-OK) of the device. On the extension phone, press * 5. Hang up.
• Aucune réception de télécopie ou une brève tonalité de réception de télécopie comme message sur le répondeur : Grâce à la fonction 51 régler le nombre de coups de sonnerie de la gestion d’appel sur 4 et le nombre total ou le nombre de coups de sonnerie du répondeur (selon le modèle) sur 5. On ne peut pas utiliser simultanément la fonction répondeur de l'opérateur téléphonique (= boîte vocale) et recevoir des fax sur l'appareil.